Accurately locating and marking buried assets ensures minimum downtime during repair or maintenance activities. It also prevents damage which can be costly for both you and your customers.
The RD7100 (successor to the RD7000) range offers the power of Radiodetection’s most advanced locating technologies, with each model optimized for a specific industry. Users benefit from the simplicity of having menu options and capabilities matched to their requirements.
The GPS and usage logging models are designed to facilitate the observance of best working practices amongst remote crews.
RD7100SL - Construction Industry
Accurate and simple to use, the RD7100SL comes with four active and two passive frequencies that cover the majority of site locating tasks. A rugged, IP65 rated casing along with a high contrast screen make it suitable for use in all weather conditions.
RD7100DL(G) - Water Industry
With four sonde frequencies, the RD7100DL can be used to trace deep pipes made from a variety of materials including: cast iron, clay, concrete and brick. Additionally, it can be used to locate Cathodic Protection System (CPS) signals applied to pipelines.
RD7100PL(G) - Power Industry
Designed for use in dense infrastructures where signals from high voltage equipment and cables can be confusing or overwhelming. Dynamic Overload Protection reduces the effect of interference, while Power Filters™ can be used to establish if a large power signal comes from one source or from the presence of multiple cables.
RD7000TL(G) - Telecom Industry
RD7000TL features higher frequencies to locate high impedance cables amongst large bundled pairs and sonde frequencies for duct and conduit tracing. Higher frequencies can also be used to trace sheathed domestic cables without grounding connections. Cable sheath faults can be located to within 100mm using 8kHz Fault Find mode with a Radiodetection A-Frame.
|Compass in Active Modes||✔||✔||✔||✔||✔||✔||✔|
|Compass in Passive Modes||CPS||CPS||PF||PF|
|Depth in Power||✔||✔|
|Power Filters (PF)||✔||✔|
O = Optional
Guidance Mode allows you to quickly follow utility paths
Guidance Mode allows you to rapidly find and follow the path of a buried utility. Directional information is displayed alongside proportional distance arrows to help find the utility and then keep you on its path. The simultaneous display of depth and current information gives confidence the correct utility is being traced even in congested networks. For rough or uneven terrain differentiated audio tones can be used, freeing the user to concentrate on potential hazards.
Peak+™ Mode combines accuracy with speed
Combine the accuracy of Peak locating with the rapid ground coverage of Guidance arrows in the new Peak+™ mode. A single key press lets you check for distortion by comparing Null with Peak.
Automatic usage-logging with GPS positioning
GPS equipped RD7100 locators automatically capture key locate parameters every second, providing a comprehensive picture of individual locates and allowing you to assess usage patterns over periods of a year or more.
The data generated can be used to ensure adherence to best practice, or to identify training needs before poor work habits develop. Additionally, the information can be used for internal audits or shared with stakeholders to enable process improvements, and evidence task completion.
Usage data can be exported in multiple file formats – for example, KML for Google Maps to confirm where and when the work was performed.
Power Filters™ pinpoint and discriminate between power cables (PL models)
When a signal transmitter can’t be connected, tracing individual power lines through complex networks can be a real challenge. Conflicting or powerful signals confuse, or combine to create a wash of signal. With a single key press you can now utilize the harmonic properties of power signals to establish if a signal comes from one source, or from multiple cables, then trace and mark their routes.
Li-Ion rechargeable battery options
Lithium-Ion rechargeable battery options for both locator and transmitter provide extended runtime with reduced running costs.
Powerful locating at your fingertips
Interface consistency with our previous locators allows you to transfer knowledge and reduces retraining costs. Menu options and capabilities are matched to specific industries simplifying use.
RD7100's ergonomic balanced design and light weight (1.9kg) ensures it is comfortable to use for extended periods.
On-site operator confidence
StrikeAlert™ in active and passive locating modes gives visual and audio warnings of shallow cables reducing the risk of accidents.
TruDepth™ ensures depth readings are only given when RD7100 is correctly oriented ensuring you can be confident in the result.
The integrity of the measurement system can be confirmed on-site. Self-test applies signals to the locating circuitry as well as checking display and power functions. ECERT™ allows you to verify and certify the calibration of your locator over the internet using RD Manager PC software package without returning the unit to a service centre.
Simplify complex locates
Simultaneous display of depth and current measurements gives you confidence you are following the correct line.
Dynamic Overload Protection filters out interference, enabling use in electrically noisy environments such as near substations or overhead power lines.
Industry specific frequencies and modes simplify menu options and reduce complexity.
Power Filters™ uses the harmonic properties of mains networks to establish if a strong power signal comes from one source of multiple cables.
|UK Mainland||£10.00 (FREE on orders over £350)|
A few things to note:
- We are no longer able to fulfill orders to Jersey, Guernsay, Ireland, Northern Ireland or Isle of Man.
- We will endeavour to deliver your order right away.
- We will normally send your order to you the next working day for stock items.
- We dispatch orders Monday to Friday (excluding UK public holidays).
- Standard delivery days are Monday through to Friday.
Buyer must notify seller within 3 days after receiving the item of any problems that may require a return and/or refund.
Upon sellers approval, items may be returned to the seller at buyers expense.
The item will then be tested to determine condition. If the item is not working properly and no signs of physical damage are visible, payment for the item will be refunded or exchanged.
Seller reserves the right to replace, repair or issue a refund for the purchase price of any item. Refunds will not be honoured for items returned to seller that do not meet the above criteria.
An order may be cancelled any time prior to despatch.
This can be done by telephone on 0800 633 5131 or emailing through our Contact Us form.
Please make sure to include your full name, address including postcode, products you wish to cancel and the Order ID from your confirmation email.
Subject to status, One + Point Ltd are now able to offer Hire Purchase and Finance Lease on a whole range of equipment.
One + Point Ltd is an appointed representative of Ignition Credit Plc which is authorised and regulated by the Financial Conduct Authority.
We offer very competitive rates flexible finance options, making purchasing survey and safety equipment much more affordable.
Credit is subject to customer profile.
How to Apply for Finance
Credit and Finance is available with our partners Ignition Credit Plc in 4 easy steps.
- Step 1 - Follow the link: http://www.ignitioncredit.co.uk/
- Step 2 - Once on the Ignition Credit Plc website on your right enter your contact details in the ‘Quick Quote section.’ One of the team will be in touch to talk you through the process.
- Step 3 - If your application is successful Ignition Credit Plc will email, post or meet with you to sign the finance documentation.
- Step 4 - Your order will then be processed and you will receive a confirmation email from One + Point Ltd giving you an estimated delivery date
Ignition Credit believes in clarity and making it as easy as possible for you to obtain the asset finance you need to benefit your business.
Our Price Match Promise is that, should you find any item cheaper elsewhere, we will aim to match or beat that price.* Terms & Conditions Apply
To take advantage of our Price Match Promise please follow these steps: -
- Visit www.onepointsurvey.com and locate the product you wish to purchase
- Find that item cheaper elsewhere
- Contact us on 0800 633 5131 or firstname.lastname@example.org
The Price Match Promise process may take 1-2 working days.
Terms & Conditions
There are a few conditions to our Price Match Promise: -
- The items you refer to must be identical
- The products in question must be brand new. Second hand, reconditioned, display stock or returned stock will not be considered for comparison.
- The product must be available to purchase online.
- Prices must fall within manufacturer's guidelines.