Leica iCON GPS 70 Series

For all Machine Control enquiries, please contact machinecontrol@onepointsurvey.com

Price on Application


With the iCON GPS 70 T, construction professionals can measure and Stake Out points quicker than ever before without the need to keep the pole vertical to level the bubble.

The combination of the latest GNSS technology and inertial measurement unit (IMU) equips the gps 70 T with true tilt compensation.

Free yourself form the boundaries and limitations of working with the pole in vertical positions and increase productivity compares to conventional methods. Collect as-built field data and Stake Out designs faster while increasing accuracy and reducing critical errors.

The iCON gps 70 series is seamlessly integrated into the Leica iCON field software. By keeping the core central interface, following the unrivalled Leica iCON concept, you will benefit from the simple-to-use workflows which require less training and avoid costly downtime.

Tilt – Traceability – Trust
There is no need to hold the pole vertical when taking measurements. Full traceability by storing tilt values with each measurement improves the quality of control of any measured point. The permanent tilt compensation extends your measurement possibilities, improves quality and accuracy of your collected data as well as eliminating critical errors as levelling the bubble is no longer necessary.

Permanent Tilt Compensation

  • Calibration-free
  • Resistant to magnetic interferences
  • Increased measurement productivity and reduction of human error

Superior and Future-proof GNSS Technology

  • 555 channels for more signals, faster acquisition and improved sensitivity
  • Intelligent management of multi-frequency, multi-constellation signals
  • Intelligent selection to automatically reject reflected or noisy signals

Hardware and Ergonomics

  • Compact and lightweight housing
  • UHF radio
  • Tilt and non-tilt variant

Smartcheck+ and Smarttrack+

  • Unique RTK technology provides continuous checks to guarantee correct results
  • Initialisation within seconds
  • Complete reliability

Robustness for most demanding sites

  • IP66/IP68 protection
  • Built for extreme temperatures of -40°C to +65°C
  • Fulfils toughest standards throughout the complete product lifetime
  • Rugged aluminium housing

iCON Field Solution

  • Seamless integration into iCON field solution
  • Easy-to-use software interface and seamless data flow throughout the workflow
  • Exceptional application functionality

Leica ConX cloud-based collaboration tool for real-time 3D data exchange/

Technical Information

GNSS Technology
Self-learning GNSS Leica RTK Plus - Adaptive on-the-fly satellite selection
Leica SmartyCheck Continuous check of RTK Solution 99.99% reliable
Signal Tracking GPS (L1, L2, L2C, L5), Glonass (L1, L2, L33),
BeiDou (B1, B2, B33), Galileo (E1, E5a, E5b, Alt-BOC, E63)
Number of Channels 555 (more signals, fast acquisition, high sensitivity)
Tilt Compensation Increased measurement productivity and
Traceability Calibration-free
Immune to magnetic disturbances
Measurement Performance
Time for initialisation Typically, 4s
Real-time Kinematic Single baseline -  Hz 8 mm + 1 ppm / V 15 mm + 1 ppm
Network RTK - Hz 8 mm + 0.5 ppm / V 15 mm + 0.5 ppm
Real-time kinematic tilt compensated1 Topographic points (not for tatic control points) - Additional Hz pole tip uncertainty typically less than 8 mm + 0.4 mm/° tilt down
to 30° tilt
Post processing Static (phase) with long observations - Hz 3 mm + 0.1 ppm / V 3.5 mm + 0.4 ppm
Static and rapid static (phase) - Hz 3 mm + 0.5 ppm / V 5 mm + 0.5 ppm
Code differential DGPS / RTCM - Typically 25 cm
Field controller and software Leica iCON site/build - Leica CC80 field controller
User interface Buttons and LEDs - On / Off and Function button, 8 status LEDs
Web server -Full status information and configuration options
Data recording

Storage – Removable SD card, 1 or 8 GB
Data type and recoding rate – Leica GNSS raw data and RINEX data at up to 20Hz

Weight 1.20kg / 3.50kg standard RTK rover setup on pole
Dimensions 173x173x108mm
Operating Temp. -40°C to +65°C
IP Rating IP66


  • System is up and running in no time
  • Rapid interchange of control panels between machines, giving you extra flexibility on site
  • One Cradle for all iCON excavate and iCON grade panels
  • Easy removal of core components for overnight security
  • Contact and cable free connection to control/display panels
  • Safety shut down feature protects system and data
  • Cradle stores machine specific settings such as hydraulic tuning
  • Unique patented Snap on/Snap off capability

Leica iCON GPS 70 Series Brochure

Leica iCON GPS 70 Series Datasheet

You may also like

Recently viewed